What is Needed for Asbestos Floor Tile Removal
Asbestos floor tiles, as well as other ACM’s, were commonly used in many homes and offices for the majority of the 20th century. Asbestos has been used in cement for houses in ceilings and walls as well as asbestos floor tiles as an adhesive or backing. There are many risks — regarding the health impact of asbestos, especially friable asbestos — that were previously not known. You will need asbestos floor tile removal if you have floor tiles that have started to crack, flake or chip at the sides.
Why Were These Tiles Installed in the First Place?
Traditional hardwood flooring and carpets were really expensive in the past as compared to the easily manufactured and fitted, cheap, wear and tear resistant asbestos floor tiles. They were most commonly found in office blocks and council houses.
Flooring that may contain asbestos includes any sheet vinyl, mastic or backing that resembles paper, and vinyl or asphalt tiles. The type of asbestos commonly found in these materials is chrysotile or white asbestos, which is also incidentally the most common form of asbestos used.
Failure to Realise the Dangers
Whenever some renovation projects are taking place, many people fail to realise that the asbestos floor tile removal should take place in a safe and controlled environment to avoid the health hazard that arises from them. Although there is no need for a license for asbestos floor tile removal, it may provide additional peace of mind when someone removes the tiles properly.
Smarter people are not really confident in doing asbestos floor tile removal themselves because they know the risks associated with it, and they turn to professionals in the business for the removal itself.
Materials Needed for Safe Removal of Asbestos Floor Tiles
You must be extra cautious when undertaking a task as great as asbestos floor tile removal. It usually entails the use of hooded coveralls that will prevent any asbestos from getting into your hair. Safety boots and gloves are also needed for the job and it is best not to have them laced. Strap on boots are best as they are easier to decontaminate afterwards when the job has been finished.
Speaking of decontamination, hooded coveralls should preferably be disposable and not used again after the asbestos floor tile removal has been completed. This ensures that anyone who has to do another asbestos removal job isn’t exposed to the risks from the job before.
It is also advisable that you should wear an FF3 Type Mask so that you don’t inhale the asbestos fibres while doing the job. A scraper should be used in removing the tiles so that the risk of breaking them is reduced. Breaking the tiles will cause non-friable asbestos in the tiles to become more friable as fibres will be released from their bonds with the tile material.
The HSE says that a shovel may also be used for asbestos removal that is being done in large portions of the house or building. Water needs to be sprayed continually to make sure asbestos fibres are not spread during work. Use a Type-H Vacuum cleaner to remove larger pieces of debris from the floor.